Search for:
Advanced Search
Homepage | Shop Services | Contact Us | News/Events | C3 Creations | My Account | Terms & Conditions | Our Facility | Photos/Videos |
Shop by Category

Currency
Language
C6 Corvette GTC-500 Adjustable Wing
Location: Shortcut to Homepage /Corvette/Exterior / Body/C6 Corvette GTC-500 Adjustable Wing
C6 Corvette GTC-500 Adjustable Wing

Product Information

C6 Corvette GTC-500 Adjustable Wing 

Part# AS-107056 C6 / C6 Z06 2005-Up

 

Warning
User assumes full responsibility for ensuring proper installation as intended. Professional installation by well-qualified personnel is highly recommended. The vehicle applications shown above are intended to work as a complete system when installed onto original vehicle body parts (i.e. trunk lids, hatches, etc.). To insure proper function and reliability, APR advises against modification or substitution of any component of the intended installation. Any modification or substitution of the airfoil, side plates, pedestals, mounting bases, mounting brackets, or hardware included with the wing kit may create unsafe operating conditions and ultimately cause this system to fail. Substitution of original vehicle manufacturer parts needed for the intended installation (i.e. rear trunk lid or rear hatch) with non-original parts may also create unsafe operating conditions and ultimately cause this system to fail.
The World's Widest Aftermarket Adjustable GT Wing Spanning 70 inches, the GTC-500 Carbon Fiber Adjustable Wing is the largest wing available in APR's catalog. With its optimized 3D airfoil shape, the GTC-500 is perfect for high speed touring applications and supplies an ample amount of down force without causing excess drag.
All GTC Series wings feature an aerodynamic 3D designed airfoil shape to obtain the optimal balance of down force. This design allows for a reduction in drag, yet maintains an ideal level of down force. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design. The results of this analysis are available.
Each GTC Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) or fiber reinforced polymer (FRP) composite materials. CFRP models contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. FRP models contain woven pre-pregnated glass fiber sheets for high strength at reasonable weight. All CFRP and FRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum molds.
Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.
Center section to outer section angle difference: 10 degrees
Gurney Flaps Gurney flaps are now available for all of APR's GTC-series (200/300/500) wings. These are super lightweight, made with carbon fiber using the pre-pregnated carbon process, and conform perfectly to the contours of the GTC-series 3D airfoils. They are easily attached using the included double-sided tape.
The Gurney flap (a.k.a. wickerbill) is an aerodynamic device that was originally pioneered and developed in the 1970s by a racing driver named Dan Gurney. Unbeknownst to his competition, this device was used to increase down force while minimizing increase in drag. He found that not only did this device increase the lift/drag (L/D) ratios, it also increased the stalling angles (so he could operate the airfoils at greater pitch angles). It took a few years for everyone else to catch on to its purpose, and now, the Gurney flap (or similar device) can be seen in race cars and even airplanes all over the world.

Note: For Wing Measurement Specifications go to www.aprperformance.com

 

Be the first to review this product!

Price: $1540.00 $1274.99


Product Code: AS-107056
Quantity: Add to Basket

Copyright (c) 2010 C3Motorsports. All rights reserved.